Introduction To Hp Efc Management - HP Surestore 64 - Director Switch User Manual

Introduction to HP EFC Management

The HP Enterprise Fabric Connectivity (HP EFC) Manager is a Java-based graphical user
interface (GUI) that enables the user to administer users and products, monitor products,
and open Product Managers.
Although the HP EFC Manager and Product Managers are separate applications, the
Product Managers are only accessible through the HP EFC Manager.
The HP EFC Manager, Fabric Manager, and Product Managers are installed on the HP EFC
server to provide local access to managed products. These applications can also be
installed on remote user workstations to provide remote access to the managed products.
A maximum of eight concurrent remote users (in addition to the local HP EFC server user)
can log in to the HP EFC Manager application.
Note that if dual Ethernet adapters are to be used on the HP EFC server, remote
workstations must use the adapter connected to the customer's intranet, and this must be
adapter number 1 (the primary adapter) in the HP EFC server. HP Surestore Director FC-
64s must communicate with the HP EFC server on a private network using adapter number
2 (the secondary adapter). Note that remote workstations are not supported on the
secondary adapter, and must always connect to the primary adapter (Figure 1). For details
on configuring remote workstations, refer to the appendix in this manual that covers your
workstation operating system.
2 Introduction to HP EFC Management