Configure Snmp Dialog Box - HP Surestore 64 - Director Switch User Manual

Figure 53

Configure SNMP Dialog Box

2. Click in the Community Name column and enter the SNMP community name for a trap
recipient. This name defines the community name that SNMP managers use for reading
variables from or writing variables to the HP EFC server. This name must be 64
characters or less.
Note To modify existing fields in this dialog box, click in the field and enter your
changes.
3. Select the Write Authorization check box to grant or deny the configured SNMP
management station write authorization. When this option is selected, an administrator
at an SNMP management station has write permissions for writable MIB objects on the
HP EFC server.
4. Click in the Trap Recipient column and enter the IP address or DNS host name for a trap
recipient (SNMP management station). This must be 64 characters or less.
5. To override the default User Datagram Protocol (UDP) port number for a trap recipient
with any legal, decimal UDP number, click Advanced.
The dialog box expands to show the UDP Port Number column.
118 Configuring SNMP