To edit Fibre Channel settings
Users with an Admin login may edit these settings.
1.
Click Edit to make the fields editable for each port.
2.
Make the required changes to the speed and/or topology and click Update.
3.
Changes affect all service sets running on the node. Click OK at the warning prompt to continue
applying the changes.
Libraries
Click VTL — Libraries in the Navigator panel to display the libraries that have been created. The
Libraries section shows all libraries configured for the couplet - the service set is shown in the
right-hand column. Click on a library to display its details in the lower half of the page. Users with
an Admin login may edit these settings or delete libraries. They may also create new libraries.
Libraries
17