Vtl (Virtual Tape Libraries) Functions; Vtl Configuration Page; Iscsi Settings Tab; Libraries Page - HP StoreOnce User Manual

3 VTL (Virtual Tape Libraries) functions

The following topics are covered in this chapter:
VTL page (page 14)
Libraries page (page 14)
Make Replication Target libraries visible to the host (page 26)

VTL Configuration page

Select VTL from the HP StoreOnce menu item to display the current VTL configuration.
The HP StoreOnce – VTL page has the following tab(s):
iSCSI Settings tab (page 14)
NOTE: There are equivalent StoreOnce CLI commands available for the tasks described in this
section. Please see the HP StoreOnce Backup system CLI Reference Guide.

iSCSI Settings tab

By default, a new library is automatically created whenever a new server first connects to the HP
StoreOnce Backup system using the iSCSI initiator. Users with an Admin login may use this page
to disable this feature.
Click Edit and make sure the Auto Creation Enabled box is unchecked.

Libraries page

Click VTL — Libraries in the Navigator panel to display the libraries that have been created.
The top half of the Libraries page shows all libraries configured for the appliance. Click on a library
to display its details in the lower half of the page. Users with an Admin login may edit these settings
or delete libraries. They may also create new libraries.
VTL devices are iSCSI libraries.
14 VTL (Virtual Tape Libraries) functions