10. Click Apply to create the slot mapping configuration. Click OK at the Wizard Complete
prompt.
Replication of cartridges will start as soon as the libraries have been synchronised. Look at
the Replication Status field on the Library Details section of the VT Mappings page. It changes
from "Pending Synchronisation" to "Synchronising" to "Synchronized".
NOTE:
Appliance to improve replication performance, remember to relocate the Target Appliance
to the target site as soon as the cartridges are synchronized.
NAS Mappings (Replication)
This page allows users with an Admin login to configure how NAS shares are mapped between
source and target appliances. Other users may view NAS mappings on this page. (Virtual tape
library mappings are managed on a separate tab.)
78
Replication
If you were able to colocate the Target Appliance on the same LAN as the Source