Remote Shutdown By Agent - Dell PowerEdge UPS 500T Installation And Configuration Manual

Parameter
Run Command File before Shutdown
Shutdown File Max Execution Time
Shutdown Conditions
Shutdown Alarm Interval
Start Warning before Scheduled Shutdown

Remote Shutdown by Agent

To configure for shutdown by a remote Agent:
1 Select the Remote Shutdown by Agent check box and click Add.
2 Enter the IP address (IPv4 address or IPv6 address) or host name of the Agent.
3 Click OK to save and exit.
When the local Agent receives the specified Agent's shutdown signal, the system shuts down in the
specified delay time.
Description
Before system shutdown, the Agent can initiate a command if this
parameter is not zero. The Agent does not begin to shut down the
system until the "Execute file before system shutting down" ends.
Before system shutdown, the time required to implement the
shutdown file.
Displays the remote Agents to be shut down. You can add, modify, or
remove the remote Agents.
The number of minutes between each shutdown warning.
The time in minutes before a scheduled shutdown when the Agent
issues the first warning.
Configuring the Software
63