Renaming The Ups Model - Dell PowerEdge UPS 500T Installation And Configuration Manual

The parameters include:
• Minimum battery charge level: Shuts down the selected load segment when the battery capability is
below its set percentage value.
• Shutdown Timer: Shuts down the selected load segment when the utility power fails for the amount of
time equal to the setting time. The value range is -1 to 32,767 seconds.
• Startup Timer: Starts up the load segment when the set timer expires after utility power is restored.
The value range is -1 to 32,767 seconds.
• Manual Shutdown: Shuts down the load segment immediately.
• Manual Startup: Starts the load segment immediately.
To configure the load segment:
1 Select the load segment to configure, or select the check box for Apply to All Load Segments.
2 Set the shutdown and startup parameters.
3 Click OK to save and exit.

Renaming the UPS Model

Select UPS Alias Information from the UPS menu to open the UPS Alias Information window
(see Figure 61).
Figure 61. UPS Alias Information Window
NOTE:
If the Dell UPS Management Software automatically detects the UPS model, you cannot rename it.
Select the UPS model from the drop-down menu. You can rename the UPS by selecting the Rename
UPS check box and entering an alias for the UPS name.
Configuring the Software
60