Dell PowerEdge UPS 500T Installation And Configuration Manual page 85

The Dell UPS Management Software window opens (see Figure 89).
Figure 89. Dell UPS Management Software Window
3 Select a UPS to monitor:
Select the UPS from the tree view on the left side of the window or select Monitor Remote UPS from
the Monitor menu.
If you selected the UPS from the tree view, continue to step 5.
If you selected Monitor Remote UPS, continue to step 4.
4 The Monitor Remote UPS window opens (see Figure 90).
Enter an IP address (either IPv4 or IPv6 address) or host name of the Agent and then click OK.
Figure 90. Monitor Remote UPS Window
Configuring the Software
85