Software Startup In A Linux Operation System - Dell PowerEdge UPS 500T Installation And Configuration Manual

2 Start the Monitor. Right click the Dell UPS Management Software Tray Icon and select Start Monitor
(see Figure 20).
Figure 20. Starting the Monitor
3 For Microsoft Windows Vista, Windows 7, and Windows Server 2008 operating systems, complete
steps 4 and 5.
4 Right click the Dell UPS Management Software Tray Icon and select Exit.
5 Restart the computer to restart the Dell UPS Management Software.
If you have administrator privileges, you can restart the Dell UPS Management Software without
restarting the computer:
• To start the Agent, select Start menu > Control Panel > Administrative tools > Services, and
find the service UPSMSmonitor. Right click UPSMSmonitor and select Start.
• To start the Tray Icon, select Start menu > All Programs > Dell UPS Management Software.

Software Startup in a Linux Operation System

To start the software in a Linux operating system:
1 The Agent starts automatically at system boot. If not already started, from the /opt/UPS directory,
enter the command:
./agent start
2 Start the Monitor. From the /opt/UPS directory, enter the command:
./monitor
22
Installation