Define Awms As Trap Host Using Dell Powerconnect Arubaos Cli; Dell Powerconnect Arubaos Traps Utilized By Awms; Auth Traps; Ids Traps - Dell PowerConnect W-Airwave Manual

Define AWMS as Trap Host using Dell PowerConnect ArubaOS CLI

To ensure the AWMS server is defined a trap host, SSH into each controller (Master and Local), enter "enable"
mode, and issue the following commands:
(Controller-Name) # configure terminal
Enter Configuration commands, one per line. End with CNTL/Z
(Controller-Name) (config) # snmp-server host <AWMS IP ADDR> version 2c <SNMP
COMMUNITY STRING OF CONTROLLER>
NOTE: Ensure the SNMP community matches what was configured in
page 7.
(Controller-Name) (config) # snmp-server trap source <CONTROLLER'S IP>
(Controller-Name) (config) # write mem
CAUTION: Do not configure the SNMP version to v3 because AWMS does not support SNMPv3 traps/informs.

Dell PowerConnect ArubaOS Traps Utilized by AWMS

The following are Auth, IDS, and ARM traps utilized by AWMS:
"Auth Traps" on page 23

"IDS Traps" on page 23

"ARM Traps" on page 24


Auth Traps

wlsxNUserAuthenticationFailed

wlsxNAuthServerReqTimedOut


IDS Traps

wlsxwlsxSignatureMatchAP

wlsxSignatureMatchSta

wlsxSignAPNetstumbler

wlsxSignStaNetstumbler

wlsxSignAPAsleap

wlsxSignStaAsleap

wlsxSignAPAirjack

wlsxSignStaAirjack

wlsxSignAPNullProbeResp

wlsxSignStaNullProbeResp

wlsxSignAPDeauthBcast

wlsxSignStaDeauthBcastwlsxChannelFrameErrorRateExceeded

wlsxChannelFrameFragmentationRateExceeded

wlsxChannelFrameRetryRateExceeded

wlsxNIpSpoofingDetected

wlsxStaImpersonation

wlsxReservedChannelViolation

Dell PowerConnect W AirWave 7.2 | Best Practices Guide
Chapter 2, "CPU, BIOS, Operating Systems, and Storage" on
AWMS and Dell PowerConnect W Integration Strategies | 23