Dell PowerEdge UPS 500T Installation And Configuration Manual page 15

4 If there is a previously installed version of the Dell UPS Management Software, the software prompts
you to remove it. Click Yes to remove the software and continue with the installation (see Figure 10).
Figure 10. Removing the Previous Software Version
5 The software provides an option to keep the previous software configuration parameters, such as local
UPS information, Network Management Card settings, shutdown parameters, and alarm settings.
Click Yes to keep the previous configuration file; otherwise, click No.
Figure 11. Saving the Previous Configuration Parameters
The software begins uninstalling the software (see Figure 12).
Figure 12. Uninstalling the Software
15
Installation