Dell PowerEdge UPS 500T Installation And Configuration Manual page 53

Dell ups management software installation and configuration user's guide
Hide thumbs Also See for PowerEdge UPS 500T:
Table of Contents

Advertisement

5 Enter the receiver's e-mail address and click OK to save and exit.
6 Dell recommends testing the e-mail function by selecting the e-mail address and clicking Test. The
software sends a test e-mail to the specified recipient.
NOTE:
You can select the event messages from the E-Mail Settings window or from the Event Action window.
7 Verify that one or more recipient e-mail addresses are selected, and then select the event messages to
be sent by selecting the message check box (see Figure 54).
Figure 54. E-Mail Recipient and Message Selection
If the selected event occurs, the software sends the e-mail to all of the selected addresses in the
Receiver E-Mail list.
Configuring the Software
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ups management software

Table of Contents