Bmc Configuration And Management Tools; Using The Remote Access Configuration Utility; Using Deployment Toolkit; Using The Bmc Management Utility - Dell External OEMR 1435 User Manual

BMC Configuration and Management Tools

Using the Remote Access Configuration Utility

The Remote Access Configuration Utility provides basic BMC setup and
configuration functions that can be accessed during system boot. Use the
Remote Access Configuration Utility for initial BMC setup and configuration
only. For advanced configuration tasks, you must use the Deployment Toolkit
SYSCFG utility or Server Administrator Version 2.0 or later.
NOTE:
The Remote Access Configuration Utility is called the BMC Setup Module in
the Dell PowerEdge x8xx systems.

Using Deployment Toolkit

The Deployment Toolkit (DTK) SYSCFG utility provides a powerful
Microsoft Windows Preinstallation Environment (PE) and Linux
command line interface for locally configuring your system's BMC as part of
-
an initial deployment. Use the DTK SYSCFG utility to set all supported
BMC features. Additionally, you can use the Deployment Toolkit utilities to
capture and replicate system settings on similar systems. See "Configuring
Your BMC Using the Deployment Toolkit Utility" on page 36 for more
information on how to install and set up the DTK SYSCFG utility.

Using the BMC Management Utility

The BMC Management Utility provides a command-line interface to your
remote management station to manage BMC-supported functions. Use the
BMC Management Utility to manage your BMC from a remote management
station and as your managed system's emergency management console. The
utility gives you the option of using either a command line interface (IPMI
Shell) or a SOL Proxy to access and manage the BMC. To use the BMC
Management Utility, you must perform the following tasks:
• Configure BMC using the Remote Access Configuration Utility, the DTK
SYSCFG utility, or Server Administrator.
• Install the BMC Management Utility on a management station.
See "Configuring Your Managed System" for instructions on configuring the
BMC on a managed system in preparation for using the BMC Management
Utility.
Introduction
21