Monitoring A Ups Through Snmp - Dell PowerEdge UPS 500T Installation And Configuration Manual

Figure 93. Delete Remote Agent

Monitoring a UPS through SNMP

You can use SNMP to monitor UPSs that have a Network Management Card installed. Up to 1,000
SNMP nodes can be monitored.
To add an area to the SNMP node:
1 Select the SNMP node from the tree view on the left side of the window.
2 Click Add Area from the SNMP menu.
3 Enter the geographic address of the SNMP card and click OK (see Figure 94).
Figure 94. Add Area Window
Configuring the Software
87