Dell PowerEdge UPS 500T Installation And Configuration Manual page 55

To configure the SMS settings:
1 Select the communication port that is being used by a GSM modem or mobile phone (see Figure 56).
2 Set the baud rate for the communication port.
3 If you are located outside of Mainland China, select Other for Locus.
Figure 56. SMS Setting Window with Selections
4 In the Receiver list, enter up to five mobile telephone numbers to receive a text message. Enter only
numbers with no spaces, alphanumeric characters, or symbols.
5 Dell recommends testing the SMS function by selecting a telephone number and clicking the Test
button. The software sends a test text message to the specified recipient.
NOTE:
You can select the event messages from the SMS Setting window or from the Event Action window.
6 Select the event messages to be sent by selecting the message check box. If the selected event occurs,
the software sends the message to all of the telephone numbers in the Receiver list.
7 To remove a recipient, select the telephone number and click Remove.
8 Click OK to save and exit.
Configuring the Software
55