Playback Your Recordings; Playback Using The Evf.24 - Panasonic Palmcorder IQ PV-A396 Operating Instructions Manual

Playback your Recordings
Playback using the EVF
CLOCK
SET UP ▲
DOWN ▼
Before you begin...
• Connect the Palmcorder to a power source.
• Insert a recorded cassette.
JL Set the POWER switch to VCR.
2
®
Press REWIND/SEARCH
to
rewind the tape.
® Press PLAY
to start playback.
© Press STOP
to stop playback.
Auto Play
When the POWER switch is set to VCR,
the cassette will automatically begin
playback if the record tab has been
removed.
Helpful Note:
Search Speed
Standard Play (SP) Search is about 3 times the
normal speed, and Super Long Play (SLP)
Search is about 9 times the normal speed.
Tracking Control
Special Effects Playback
(Sound is Muted)
Rapidly Locate a Scene
Press FAST FORWARD/SEARCH or
REWIND/SEARCH
for rapid visual search.
Press again,
or press PLAY to resume
normal speed.
View a Still Picture
Press STILL
to freeze the playback picture.
Press
again
to resume normal playback.
Note:
• During search playback, horizontal noise bars
will appear and there will be no audio.
• To protect the tape and video heads, your
Palmcorder's operating modes will revert as
follows:
STILL-► STANDBY after 5 minutes.
STANDBY -► POWER OFF after 5 minutes
when using a Battery Pack.
• When the tape reaches its end during playback,
or fast forward, it will rewind automatically.
24
Auto Tracking
Continuously analyzes the signal of each
recording for optimum picture quality.
Manual Tracking
To minimize the noise in some recordings,
manual tracking may be necessary.
For Noise in Playback mode:
Press CLOCK SET UP ▲ or DOWN ▼
until picture clears.
Press DISPLAY
to return to Auto Tracking.
For Noise in Still mode:
Press CLOCK SET UP ▲ or DOWN ▼
until picture clears.
V-Lock Control
(Reduces jitter in Still mode.)
Press DISPLAY and CLOCK SET UP ▲
or DOWN
▼ until picture is stable.