Storing Sender Information; Settings Required In The Web Page - Sharp MX-2300N Guide Scanner Manual

System Settings
Default Settings
Display Contrast
3
Keyboard Select
System Settings
Clock Adjust
Year
4
2005
Daylight Saving Time Setting

STORING SENDER INFORMATION

Before using Scan to E-mail
Store the default sender name in "Sender Name" and the reply e-mail address in "Reply Address". These will be used
when a sender name is not selected.
System Settings (Administrator): Default Sender Set
This is used to store the sender name and e-mail address that is used when a sender is not selected.
Before using Internet fax
Store the sender name in "Name" and the sender Internet fax address in "Own Address".
System Settings (Administrator): I-Fax Own Name and Address Set
Use this setting to program the sender's name and sender's address.

SETTINGS REQUIRED IN THE WEB PAGE

In order to use the network scanner function, basic network scanner settings, server settings including SMTP and DNS
server settings, and the sender's address must be configured in the Web pages.
• Basic network scanner settings
To configure network scanner settings, click [Application Settings] and then [Network Scanner Settings] in the Web
page menu. (Administrator rights are required.)
• Server settings
To configure server settings, click [Network Settings] and then [Services Settings] in the Web page menu.
(Administrator rights are required.)
Clock
Month Day Hour Minute
08 01 10 50
Date Format
Touch the [Clock] key.
OK
Check the date and time.
OK
• If the date and time are correct, touch the [OK] key.
• To change the date and time, touch the [Year], [Month],
[Day], [Hour], and/or [Minute] keys and use the
keys to adjust each value. When the correct date and time
appear, touch the [OK] key.
7