Job Queue Screen And Completed Job Screen - Sharp MX-2300N Guide Scanner Manual

JOB QUEUE SCREEN AND COMPLETED JOB SCREEN

The job status screen consists of two screens: the job queue screen that shows reserved jobs and the job currently in
progress, and the completed jobs screen. To switch between the two screens, touch the job status screen selector key
((2) below).
Job queue screen
(1)
Address Set Time Pages
Broadcast0001 10:00 11/01 000/003 Connecting
AAA AAA 10:05 11/01 000/001 Waiting
BBB BBB 10:22 11/01 000/004 Waiting
CCC CCC 10:30 11/01 000/010 Waiting
Print Job
Scan to
(6)
(1) Job queue screen
Jobs are shown as keys in the order they were reserved.
Each key shows information on the job and its current
status.
☞
Job key display
(2) Job status screen selector key
Touch this key to switch between the job queue screen
and the completed jobs screen.
(3) Job queue screen [Detail] key
This shows detailed information on broadcast
transmission jobs and the status of jobs. Select the key of
the desired job in the job queue screen (1) and then
touch the [Detail] key.
(4) [Priority] key
Touch this key to give priority to a selected job.
☞
GIVING PRIORITY TO A SCAN TRANSMISSION
JOB (page 82)
(5) [Stop/Delete] key
Touch this key to stop or delete a selected job.
☞
STOPPING A SCAN JOB BEING TRANSMITTED
OR WAITING TO BE TRANSMITTED
Job Queue
Status
1/1
Complete
Detail
Priority
Stop/Delete
Fax Job Internet Fax
(page 77)
(page 81)
Complete screen
Address
(2)
Broadcast0001
Broadcast0002
(3)
Broadcast0003
(4)
(5)
DDD DDD
Print Job
(6)
(6) Mode switch keys
Use these keys to change the job status screen mode.
(7) Completed jobs screen
This shows up to 99 completed transmission or reception
jobs in each mode. A description of the job and the result
(status) are shown.
A broadcast transmission job is shown as a key.
(8) Completed jobs screen [Detail] key
This shows detailed information on the results of
completed broadcast transmissions and jobs that used
the document filing function. Select the key of the desired
job in the completed jobs screen (7) and then touch the
[Detail] key.
☞
CHECKING COMPLETED JOBS
(9) [Call] key
Touch this key to call up and use a transmission or
reception job stored with the document filing function.
76
(7)
Start Time Pages Status
10:00 11/01 990/010 NG000000
10:05 11/01 050/005 Send OK
10:08 11/01 001/001 Send OK
10:30 11/01 001/001 Send OK
Scan to Fax Job
Job Queue
(2)
1/8
Complete
(8)
Detail
(9)
Call
Internet Fax
(page 80)