Sharp MX-2300N Guide Scanner Manual page 100

8
If the colour mode setting of the [BLACK & WHITE START] key (
will not operate if the [BLACK & WHITE START] key (
To cancel scanning...
Press the [STOP] key (
To cancel the background suppression setting...
Touch the [Cancel] key in the screen of step 5.
or
) to cancel the operation.
Press the [COLOUR START] key
( ) or the [BLACK & WHITE
START] key (
Scanning begins.
• If you inserted the original pages in the document feeder
tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan
each page one page at a time.
When scanning finishes, place the next original and press
the [COLOUR START] key (
WHITE START] key (
scanned and then press the [Read-End] key.
A beep will sound to indicate that scanning is finished.
) is [Mono2], the suppress background function
) is pressed.
99
).
) or the [BLACK &
). Repeat until all pages have been