Changing The File Format - Sharp MX-2300N Guide Scanner Manual

CHANGING THE FILE FORMAT

The file format (file type and compression method / compression ratio) for sending a scanned image can be changed at
the time of transmission. In addition, if the scanned originals are divided into separate files, the number of pages per file
can be changed.
USB Mem. Scan
Mode Switch
Exposure
Image
Settings
200X200dpi
Resolution
File Name
1
Auto
Original
(1)
File Type
PDF
Encrypt PDF
Specified Pages per File
File Type
2
PDF
Encrypt PDF
Specified Pages per File
• When this screen is displayed, the setting screen of [B/W] mode initially appears.
• The format set for [B/W] mode will be the file format that is used when the [BLACK & WHITE START] key (
pressed with the B/W Mode set to [Mono2].
• The format set for [Colour/Grey] mode will be the file format that is used when the [COLOUR START] key (
is pressed, or when the [BLACK & WHITE START] key (
• The file type of [B/W] mode and the file type of [Colour/Grey] mode are linked. The file type cannot be set separately
for each. (When [JPEG] is selected for [Colour/Grey] mode, [TIFF] is automatically selected for [B/W] mode.)
Auto Mono2/Auto
Colour Mode
TIFF/JPEG
File Format
Special Modes
A4
Special Modes
(2)
Compression Mode
TIFF None
MH (G3)
MMR (G4)
(1-99)
(1) (2)
Compression Ratio
TIFF Low
JPEG Medium
High
(1-99)
(2) (3)
Display the format setting screen.
(1) Touch the [Image Settings] key.
(2) Touch the [File Format] key.
Set the format.
● Scanning in Mono 2
(1) Select the file type.
OK
(2) Select the compression mode.
B/W
Colour/Grey
● Scanning in colour/greyscale
(1) Touch the indicated key to select
OK
[Colour/Grey] mode.
B/W
When [Colour/Grey] is highlighted, [Colour/Grey] mode is
Colour/Grey
selected.
(2) Select the file type.
(3) Select the compression ratio.
(1)
High compression results in a smaller file size, however,
the image quality is slightly degraded.
) is pressed with the B/W Mode set to [Greyscale].
59
) is
)