Sharp MX-2300N Guide Scanner Manual page 49

6
Do not disconnect the USB memory until "Sending data has been completed." appears in the touch panel.
• To scan in full colour, press the [COLOUR START] key (
WHITE START] key (
the original will be detected automatically and scanning in full colour, greyscale or Mono 2 will take place.
• If the file type is [Encrypt PDF], a password entry screen will appear when the [START] key is pressed.
Touch the [Entry] key to open the keyboard screen, enter a password (maximum of 32 characters), and touch the
[OK] key. The recipient must use the password entered here to open the encrypted PDF file.
To cancel encrypted PDF, touch the [Cancel] key. The format settings screen will appear to let you change the file
type. Select a new file type and press the [START] key to begin transmission.
7
The exposure, resolution, and scan size/send size can be changed for each original page that is scanned.
Place next original.
Press [Start].
When finished, press [Read-End]
8
If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the
transmission is reserved.
or
). If the colour mode of the [COLOUR START] key (
Please enter encrypt PDF
password.
or
(Pg.No.x)
Read-End
Press the [COLOUR START] key (
or the [BLACK & WHITE START] key
( ).
Scanning begins.
• If the original is placed on the document glass, the
[Read-End] key appears in the touch panel. To scan only one
original, go to step 8. To scan multiple originals, go to the
next step.
• If the original was inserted in the document feeder tray, a
beep will sound when scanning is completed and
transmission will begin. Go to step 9.
). To scan in black and white, press the [BLACK &
Cancel Entry
If the original was placed on the
document glass, replace it with the next
original and press the [COLOUR START]
key ( ) or the [BLACK & WHITE
START] key (
Repeat until all originals have been scanned.
Touch the [Read-End] key.
A beep will sound to indicate that the operation is completed.
Open the automatic document feeder and remove the original.
48
) is set to [Auto], the colour of
).
)