Original - Sharp MX-2300N Guide Scanner Manual

SPECIFYING THE SEND SIZE OF THE ORIGINAL
Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If
a send size smaller than the scan size is selected, the image will be reduced.
The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by
numerical values.
USB Mem. Scan
Mode Switch
Exposure
Image
Settings
200X200dpi
Resolution
File Name
1
Auto

Original

(1)
USB Mem. Scan
Scan Size
Original
Auto
2
2-Sided
Booklet
2-Sided
Tablet
USB Mem. Scan
Original
Auto
Manual
A4
3
• Size keys that cannot be specified for the send size are greyed out to prevent selection.
• To specify an inch size for the send size, touch the [AB
send size.
USB Mem. Scan
Scan Size
Original
Auto
4
2-Sided
Booklet
2-Sided
Tablet
Auto Mono2/Auto
Colour Mode
TIFF/JPEG
File Format
A4
Special Modes
(2)
100%
Send Size
A4 Auto
Image Orientation
AB
Inch
A5 B5R B4
A4 A3
A5R
B5 A4R
(1)
141%
Send Size
A4 A3
Image Orientation
Display the original settings screen.
(1) Touch the [Image Settings] key.
Special Modes
(2) Touch the [Original] key.
Touch the [Send Size] key.
OK
Specify the send size.
OK
(1) Touch the desired send size key.
(2) Touch the [OK] key.
(2)
Inch] key to highlight the [Inch] side and then specify the
Touch the [OK] key.
OK
The ratio used for reduction or enlargement of the original will
appear between the "Scan Size" and the "Send Size".
57