Using A Search Number To Specify A; Destination - Sharp MX-2300N Guide Scanner Manual

USING A SEARCH NUMBER TO SPECIFY A

DESTINATION

A destination stored in the Address Book can be called up using the
any of the modes or in the Address Book screen.
Ready to send.
Scan Scan
Mode Switch
A4
Image
1
Settings
Send Settings
• The search number is the number that was stored when the destination was stored in the address book.
2
• If you do not know the search number, print the one-touch address list using "Sending Address List" in the system
settings.
• When entering search numbers such as "001" and "011", "0" can be omitted. For example to enter "001", enter "1"
and touch the
If an incorrect search number is entered...
Press the [CLEAR] key (
Resend
Send
Address Book
Auto
Address Entry
Special Modes
Quick File
key or the [Next Address] key.
) to clear the number and enter the correct number.
Touch the
File
Enter the 3-digit search number of the
address with the numeric keys.
When the 3-digit search number is entered, the stored address
is called up and specified as a destination.
22
key. This can be done in the base screen of
key.