Sharp MX-2300N Guide Scanner Manual page 97

To Cc
AAA AAA
CCC CCC
EEE EEE
7
ABCD
Frequent Use
8
• If the destination is an Internet fax destination, press the [BLACK & WHITE START] key (
• The original is scanned into memory. The original cannot be scanned at a specified time.
• The time can be specified up to a week in advance.
• Up to 94 timer transmissions can be stored at once.
• If another transmission is in progress when the specified time arrives, the timer transmission will begin after that
transmission is finished.
• Other transmissions can be performed as usual after a timer transmission is stored.
• A timer transmission can be deleted in the job status screen.
• If a timer transmission is given priority in the job status screen, the time specification is cancelled. The transmission will
begin as soon as the job in progress is completed.
Condition
Bcc
1/1
Address Review
BBB BBB
DDD DDD
Address Search
FFF FFF
EFGHI JKLMN OPQRST UVWXYZ Sort Address
or
Specify the destination.
Settings
• Touch the one-touch key for the desired destination and then
the [To] key.
Global
☞
SPECIFYING DESTINATIONS IN THE ADDRESS BOOK
(page 19)
• To specify a destination address in a global address book,
touch the [Global Address Search] key and specify the
address.
☞
CALLING UP A DESTINATION FROM A GLOBAL
ADDRESS BOOK
Press the [COLOUR START] key
(
START] key (
Scanning begins.
• If you inserted the original pages in the document feeder
tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan
each page one page at a time.
When scanning finishes, place the next original and press
the [COLOUR START] key (
WHITE START] key (
scanned and then press the [Read-End] key.
A beep will sound to indicate that scanning is finished.
96
(page 24)
) or the [BLACK & WHITE
).
). Repeat until all pages have been
) or the [BLACK &
).