Sharp MX-2300N Guide Scanner Manual page 47

• When placing the original, orient it as explained below.
Original
Portrait orientation*
2
Landscape orientation
* To place a large portrait-oriented original, place it as shown above in "Landscape orientation" and specify the
placement orientation in step 5.
• Place A5 (5-1/2" x 8-1/2") size originals in portrait (vertical) orientation (
If placed in landscape (horizontal) orientation (
size original, enter the original size manually.
• Originals cannot be scanned in succession from both the automatic document feeder and the document glass and
sent in a single transmission.
Do not place any objects under the original size detector. Closing the automatic document feeder with an object
underneath may damage the original size detector plate and prevent correct detection of the document size.
Scan
Mode Switch
Image
Internet Fax
Settings
Send Settings
USB Mem. Scan
PC Scan
3
(1) (2)
• When scanning to USB memory, there is no need to specify the destination.
• If a destination of another mode has been previously specified, a message will appear when you change to USB
memory mode indicating that the destination setting will be cleared. Touch the [OK] key in the message screen and
go to the next step.
Original size
detector
Document feeder tray
Place the originals face up.
1
1
Fax Address Book
Address Entry
Special Modes
Data Entry
Quick File
Place the original.
1
1
), an incorrect size will be detected. For an A5R (5-1/2" x 8-1/2"R)
Change to USB memory mode.
(1) Touch the [Mode Switch] key.
(2) Touch the [USB Mem. Scan] key
File
46
Document glass
Place the original face down and align the
corner with the tip of the arrow mark
top left corner of the document glass scale.
1
1
).
in the