The scanner is the last device in the daisy chain
The scanner is in the middle of the daisy chain
Connecting the scanner
Connect the scanner to your computer or to another SCSI device
as follows:
Note:
The combination of 50-pin and 25-pin connectors you need varies
depending on the maker of your SCSI device and SCSI interface board.
1. Make sure the scanner, computer, and all other SCSI devices
are turned off and unplugged from the power source.
(other SCSI device)
terminator off
Setting Up the Scanner
terminator on
(other SCSI device)
2-13
2