Epson 1200 series User Manual page 135

Interface port or software
settings are incorrect.
For SCSI model users :
SCSI ID or terminator is
incorrect .
Interrupt settings are
conflicting with your
SCSI board.
For USB model users :
More than one hub is in
use, or the cable is
unsuitable.
Make sure your interface port and
software settings are correct. Also
make sure that your computer's
interface board is installed properly.
Make sure the scanner's SCSI ID and
terminator are set correctly. See
"Connecting the Scanner (SCSI) to
Your Computer" on page 2-8.
If you have other expansion boards in
your computer, make sure that their
interrupt settings are interfering with
your SCSI board. See your computer's
documentation for details.
Try connecting the scanner directly
to the computer's USB port, or use an
EPSON USB cable .
Maintenance and Troubleshooting
7
7-11