Scanning Procedure
This chapter shows you how the scanner operates. The basic
procedure for scanning is as follows:
1. Turn on the scanner. (Keep in mind the "Power-on sequence"
on page 2-15.)
2. Place the document you want to scan on the document table.
(This is described in detail in the next section.)
3. Run the scanner software and scan. (See page 4-8 for details
on scanning.)
Placing a Document on the Scanner
Before scanning a document, remember to respect the rights of
copyright owners. Do not scan published text or images without
first checking the copyright status.
1. Turn on the scanner by pressing the Poperate button. The
operate light starts flashing.
operate button
4-2
Using Your Scanner
operate light