Scanning does not start by pressing the Start button.
Cause
Scanner Monitor software is
not installed properly. (For
Windows 95, NT 4.0 and
Macintosh)
Scanner Event is not selected
properly. (For Windows 98)
Paper jams
Paper gets jammed in the Automatic Document Feeder.
Cause
Paper cannot pass smoothly
through the Automatic
Document Feeder.
7-26
Maintenance and Troubleshooting
What to do
Make sure the Scanner Monitor
software is running and check the
Scanner Monitor's Launch
Application path is set correctly.
Click the Events tab in your scanner's
Properties dialog box and make sure
the Disable device events check box
is clear. And make sure the Start
button is selected as the Scanner
events, and at least one scanner event
recognizable application in the Send
to this application box is selected.
What to do
Remove the jammed paper.
See page 6-20.