Initialization Methods
The scanner can be initialized (returned to a fixed set of
conditions) in the following ways:
SCSI model
Hardware
initialization
Software
initialization
USB model
Hardware
initialization
Software
initialization
A-8
Technical Specifications
* The scanner is turned on.
* The scanner receives a SCSI Reset signal from
the SCSI interface.
* Software sends the ESC @ (initialize the scanner)
command.
* The scanner receives a SCSI Bus Device
Message.
* The scanner is turned on.
* The USB cable is unplugged from the USB port
on the scanner.
* Software sends the ESC @ (initialize the scanner)
command.
* The scanner receives a Bus Reset from the USB
interface.