Epson 1200 series User Manual page 34

c
2. Connect one end of the interface cable to one of the scanner
SCSI connectors until the locks on both sides snap in.
Note:
To connect the scanner to a SCSI device other than the
computer, the length of cable in the daisy chain must not exceed
6 meters; otherwise the system may not work properly.
To connect the scanner to a PC using SCSI-2, the length of the
cable must not exceed 3 meters.
3. Connect the other end of the cable to the SCSI port of your
computer or another SCSI device.
Note:
The SCSI port on the Macintosh is the larger port with the SCSI
icon over it.
4. Plug in the power cords of your computer, scanner, and other
external SCSI devices.
Note:
Before turning on your system, be sure to read "Power-on sequence"
following.
2-14
Setting Up the Scanner
Caution:
Do not connect the scanner to the computer or other devices
while they are turned on as damage may occur.