Dell PowerEdge R415 Owner's Manual page 88

Removing a Hard Drive From a Hard-Drive Carrier
Remove the screws from the slide rails on the hard-drive carrier and separate
the hard drive from the carrier. See Figure 3-6.
Figure 3-6. Removing and Installing a Hard Drive Into a Hard-Drive Carrier
1
4
1 screw (4)
3 SAS/SATA screw hole
Installing a Hard Drive Into a Hard-Drive Carrier
1 Insert the hard drive into the hard-drive carrier with the connector end of
the drive at the back. See Figure 3-6.
2 Align the screw holes on the hard drive with the back set of holes on the
hard-drive carrier.
3 Attach the four screws to secure the hard drive to the hard-drive carrier.
88
Installing System Components
2 hard drive
4 hard-drive carrier
2
3