Dell PowerEdge R415 Owner's Manual page 153

3 Disassemble components from the system. See "Installing System
Components" on page 79.
• System board shroud
• Power distribution board shroud
• Hard drives
• VFlash SD cards
• USB memory keys
• NIC hardware key
• Expansion card
• Integrated storage card
• iDRAC6 Express card
• iDRAC6 Enterprise card
• Power supplies
• Fans
• Processors and heat sinks
• Memory modules
4 Let the system dry thoroughly for at least 24 hours.
5 Reinstall the components you removed in step 3.
6 Close the system. See "Closing the System" on page 83.
7 Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
If the system does not start properly, see "Getting Help" on page 181.
8 If the system starts properly, shut down the system and reinstall all of the
expansion cards that you removed. See "Installing an Expansion Card" on
page 101.
9 Run the appropriate online diagnostic test. See "Using Dell Diagnostics"
on page 169.
If the tests fail, see "Getting Help" on page 181.
Troubleshooting Your System
153