Setting The Tcp/Ip - Sharp Notevision PG-M25X Operation Manual

Network Settings (cont.)
4
Press to move the cursor
to the next charactor.
Note
• If you want to correct a letter or symbol,
press or to move the cursor to the
character you want to correct, and then use
or to correct the character.
• Characters can also be selected using
on the GyroRemote.
• If you want to cancel the settings, press
5
Repeat steps 3 and 4 to enter the
remaining characters you want.
Note
• A maximum of 16 characters can be entered.
6
Press .
• The settings are stored and active.

Setting the TCP/IP

Set the IP Address, Gateway, Subnet Mask of
the projector.
Set "TCP/IP" in the network menu on the
menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
1
Press
TCP/IP and then press
Note
• If a password has been set, the password
input box will be displayed when selecting
the "TCP/IP".
2
Press or
Address", "Gateway" or
Mask" and then press
3
Press
the values you want to set.
70
-70
.
or to select
.
to select "IP
"Subnet
.
or to select