Selecting The Picture Display Mode; Switching The Picture Display Using Different Input Signals - Sharp Notevision PG-M25X Operation Manual

Selecting the Picture Display Mode

This function allows you to modify or customize the picture display mode to enhance the
input image. Depending on the input signal, you can choose "NORMAL", "FULL", "DOT BY
DOT", "BORDER", "STRETCH" or "SMART STRETCH" image.
Switching the Picture
Display Using Different
Input Signals
1
Press to display "Button
Assign 4/5".
• The Assign function is displayed at the
bottom right of the screen.
2
Press .
Info
• In the "DOT BY DOT" mode, images are
diplayed with the original resolution,
therefore they are not enlarged.
• When XGA (1024 × 768) signals have
been entered or when using INPUT 4
Mode, they will be fixed as NORMAL.
• "STRETCH" is fixed when 720P or 1080
signals are entered.
• To return to the previous mode, press
while "RESIZE" is displayed on the screen.
-82
-82
Function 3
button
I
Screen display of the picture display mode
ASSIGN
button