Table of Contents
Advertisement
Helpful Functions Set during Installation ("Options 2"
menu)/Using the Other Menus ("Language" and
"Status" menus)
t t t t t Setting the TCP/IP
Set the TCP/IP manually.
1
Select "TCP/IP", then press ENTER.
2
Enter "IP Address" using '
and \, then press ENTER.
3
Enter "Subnet Mask" using '
| | | | | and \, then press ENTER.
4
Enter "Gateway" using '
\, then press ENTER.
Selectable items
IP Address
Factory default setting:
192.168.150.002
Enter an IP address appropriate for the
network.
Subnet Mask
Factory default setting:
255.255.255.000
Set the subnet mask to the same as that
of the computer and equipment on the
network.
Gateway
Factory default setting:
000. 000. 000. 000
* When not in use, set to:
"000. 000. 000. 000".
Note
• Before setting "TCP/IP", select "OFF" for "DHCP
Client".
• Confirm the existing network's segment (IP ad-
dress group) to avoid setting an IP address that
duplicates the IP addresses of other network
equipment or computers. If "192.168.150.002"
is not used in a network with an IP address of
"192.168.150.XXX", you don't have to change
the projector IP address.
• For details about each setting, consult your net-
work administrator.
' '
' ' , "
" " , | | | | |
" "
' ' , "
' '
" " ,
" "
' ' , "
' '
" " , | | | | | and
" "
Description
Menu operation
y y y y y Service Mode
Only the service centers use the menu. Do not
use the menu.
u u u u u Returning to the Default
Settings
This function allows you to initialize the settings
you have made in the projector.
Note
About the network settings
• "IP Address", "Subnet Mask", "Gateway" and
other network setting items are initialized.
The following items or menu cannot be initialized.
• "C. M. S." menu
-"Lightness", "Chroma" and "Hue" respectively
saved for Custom 1-3 on the "C.M.S." menu.
• "Fine Sync" menu
-Resolution
• "Options 1" menu
-System Lock
• "Options 2" menu
-Lens Type
• "Language" menu
• Image stored using "Image Capture"
• Lamp Timer (Life)
Selecting the On-screen
Display Language
The projector can switch the on-screen display
language among 16 languages.
Overview of All Menu
Settings and the Lamp Life
This function can be used to display all the ad-
justed settings as a list on the screen and you
can confirm the lamp life.
Page
47
-65
Advertisement
Table of Contents
