Registering Multiple Gyroremotes In One Projector - Sharp Notevision PG-M25X Operation Manual

3
Press on the GyroRemote
you want to register.
• The LED indicator on the GyroRemote
blinks.
• "Registered" is displayed at the bottom
of the screen for a few seconds and
registration starts.
When storing is complete, "Learn
Mode" is displayed.
Note
• If no action is taken for more than 5
minutes, the projector exits from the
Learn mode.
4
Press
• This completes the Registration mode.
Registering Multiple
GyroRemotes in One
Projector
A maximum of 8 GyroRemotes can be registered.
1
Set the same channel for the
RF channel of the GyroRemote
you want to register.
• For details on the setting, see
2
Using step 3 in "Registering
the GyroRemote in the Projec-
tor", press
GyroRemotes to be registered.
• When registering other GyroRemotes
continuously, after each GyroRemote
is registered and the Registration
mode message is displayed, proceed
with the next GyroRemote.
• After 8 GyroRemotes have been reg-
istered, the Registration mode will
automatically terminate.
3
Press when the number of
registered GyroRemotes is
fewer than 8.
• This ends the Registration mode.
Note
• Contact your nearest Sharp Autho-
rized Projector Dealer or Service
Center if you need to use an addi-
tional GyroRemote unit.
TEACH button
page 42.
on the
ENTER button
TEACH button
LED
indicator
Registered
-43