Activating The Srgb Color Management Function; Setting The Color Management Function (Srgb) - Sharp Notevision PG-M25X Operation Manual

4
Press to move the inset pic-
ture.
• The inset picture will be moved to the
inset picture frame.
Note
• The inset picture can only be displayed
with composite video (NTSC/PAL/
SECAM) or S-Video signal.
• The Freeze function works only with the
inset picture, when the Pict in Pict mode
is in operation.
When the signal entered into INPUT 1 is
as follows, Pict in Pict does not work:
• With a resolution that exceeds SXGA.
• When the input signal is 480
I
720P or 1080 .
• When the input signal has changed to
the Interlace mode using RGB signals.
• When the picture display mode is set to
"DOT BY DOT".
• When no signals are sent to INPUT 1,
or when the resolution or refresh rate
(vertical frequency) is changed.
• You can use
on the GyroRemote or
on the projector to change the inset
picture.
Activating the
This function calibrates the projector's output to conform to "sRGB standard (6,500K)".
Setting the Color Manage-
ment Function (sRGB)
Select "sRGB" in the "Options (1)" menu
on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
• For additional information about sRGB
function, please visit "http://www.srgb.com/".
Info
• When setting sRGB to "ON", the pro-
jected image may become dark; however,
this does not indicate a malfunction.
When "sRGB" is set to "ON";
• The gamma correction cannot be set.
• "Red", "Blue" or "CLR Temp" in "Picture"
cannot be adjusted.
I
, 480P,
sRGB Color Management Function
-89