Setting The Video Signal - Sharp Notevision PG-M25X Operation Manual
Digital multimedia projector
Hide thumbs
Also See for Notevision PG-M25X:
- Mode d'emploi (62 pages) ,
- Software manual (62 pages) ,
- Service manual (182 pages)
Table of Contents
Advertisement
Setting the Video Signal
The video input system mode is preset to "Auto"; however, a clear picture from the con-
nected audio-visual equipment may not be received, depending on the video signal differ-
ence. In that case, switch the video signal.
Setting the Video
Signal
Select "Video System" in the "Options
(1)" menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to
55.
Note
• The video signal can only be set in IN-
PUT 2 or INPUT 3 mode.
• In "Auto", images are displayed in PAL
even if PAL-N or PAL-M input signals are
received.
PAL
When connected to PAL video equipment.
SECAM
When connected to SECAM video
equipment.
NTSC4.43
When reproducing NTSC signals in
PAL video equipment.
NTSC3.58
When connected to NTSC video equipment.
-93
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Notevision PG-M25X and is the answer not in the manual?
Questions and answers