Displaying The Break Timer; Displaying And Setting The Break Timer; To Cancel The Break Timer - Sharp Notevision PG-M25X Operation Manual

Displaying the Break Timer

Displaying and Setting
the Break Timer
Select "Break Timer" from the "Options
(2)" menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
1
When " " is displayed, press
or
Break Timer.
• You can set anywhere between 1 and
60 minutes (in 1 minute units).
To Cancel the Break
Time
1
Press on the projector or
press on the GyroRemote.
Note
• Set the Break time using the GyroRemote
(see page 41).
• Auto Power Off will be temporarily dis-
abled during the Break Timer.
If no signal transmission occurs for more
than 15 minutes after the Break Timer has
completed, the projector will turn off.
• The Break Timer will be displayed on the
startup image. To change the screen dis-
played during the Break Timer, change the
setting of "Startup Image" (see
to set the
page 95).
"On-screen Display
-97