Changing The Keycode - Sharp Notevision PG-M25X Operation Manual

Setting the Anti-Theft (cont.)

Changing the Keycode

• When "Anti-Theft" is selected and a pass-
word has been entered, the password input
box is displayed. After the password has been
entered, you can change the keycode.
Select "Anti-Theft" in the "Options (2)"
menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
1
Enter the preset 4-digit keycode
in"Old Code" using the buttons
on the GyroRemote or on the
projector.
2
Press any button you like on the
GyroRemote or the projector to
enter the new keycode.
3
Enter the same 4-digit keycode
in "Reconfirm" .
Note
• If you do not want to set a keycode, leave
the keycode field blank in steps 2 and 3
and press .
-104
-104