Displaying Dual Pictures (Pict In Pict); Displaying The Inset Picture - Sharp Notevision PG-M25X Operation Manual

Displaying Dual Pictures
Picture in Picture function allows you to display two pictures on the same screen. You can
display the image input from INPUT 2 or 3 as an inset picture overlapping the main picture
from INPUT 1. (This function can only be set in the RGB menu.)

Displaying the Inset Picture

Select "Pict in Pict" in the "Options (1)"
menu on the menu screen. Make sure
to operate after signals have been en-
tered in INPUT 1, INPUT 2 and INPUT 3.
➝ For operating the menu screen, see
pages 50 to 55.
1
Press to select
• Select
to clear the Pict in Pict mode
Note
• When
operating
GyroRemote, press
"Button Assign 3/5" and press
• Pict in Pict does not function with
INPUT 4.
2
Press to change the image
in the inset picture.
3
Press ,
to set the position of the inset
picture.
• Press
to stop the frame from mov-
ing or to make the frame disappear.
Note
• Hold down
GyroRemote in all directions, when
moving the position of the inset pic-
ture using the GyroRemote.
-88 -88
(Pict in
.
with the
to display
4
.
, or
and move the
Pict)
INPUT
button
Adjustment
'"\ |
buttons ( )
Enter button UNDO
button