Using Polling Memory - Sharp AR-FX11 Operation Manual

USING POLLING MEMORY

This function sends a document previously scanned into memory to a receiving machine when the receiving
machine calls and polls your machine. (If desired, you can restrict polling to fax machines whose fax number you
have programmed in your machine. See "Restricting polling access (polling security)" on page 41.) The machine has
"memory boxes", which are memory used for the regular polling memory function, F-code polling memory, F-code
confidential transmission, and F-code relay transmission (see "BOXES AND SUB-ADDRESSES/PASSCODES
REQUIRED FOR F-CODE TRANSMISSION" on page 48) The polling memory function explained here uses a
memory box called the "PUBLIC BOX".
When using the polling memory function, do not set the reception mode to MANUAL. (See "SETTING THE
Note
RECEPTION MODE" on page 61.)
Scanning a document into polling memory (the Public Box)
This section explains how to scan a document into the Public Box. If other documents have already been stored in
the Public Box, the new document will be appended to those documents. If the previous documents are no longer
needed, they can be replaced.
1
Follow steps 1 to 4 of "BASIC
PROCEDURE FOR SENDING FAXES"
(page 18) and then follow the steps
below.
2
Press the [SPECIAL FUNCTION] key.
Press the [SPECIAL
2-SIDED
FUNCTION] key to display the
COPY
SPECIAL FUNCTION
special function menu.
DUPLEX SCAN
ACC.
3
Select "ORIGINAL STORE" with the
[ ] or [ ] key.
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
4
Press the [OK] key.
BACK OK
GHI
SPECIAL FUNCTION
COMM. SETTING
ORIGINAL STORE
PRINT
SPECIAL FUNCTION
ORIGINAL STORE
PRINT
ENTRY
ADVANCED TRANSMISSION METHODS
5
Select "MEMORY POLLING" with the
[ ] or [ ] key.
6
Press the [OK] key.
OK
• If there are no previously stored documents in the
Public Box, the above screen appears. If the above
screen appears, go to step 7.
• If there are previously
stored documents in the
Public Box, a screen will
appear to let you select
what action to take.
(1) If you wish to append the new document, select
"ADD" with the [ ] or [
and then go to step 7.
(2) If you wish to replace the previous document with
the new document, select "CHANGE" with the [
or [ ] key, press the [OK] key, and then go to step
7.
SELECT READING
MEMORY POLLING
S.A.M-POLL ORIG
SELECT SENDING
1 TIME
REPEAT
ORIGINAL
ADD
CHANGE
DELETE
PRINT
] key, press the [OK] key,
]
39
3