Sharp AR-FX11 Operation Manual page 49

3
Select "RX DATA TRANSFER" with
the [ ] or [ ] key.
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
4
Press the [OK] key.
BACK OK
GHI
5
Select "TRANSFER" with the [ ] or
[ ] key.
To cancel forwarding, select "NO TRANSFER".
6
Press the [OK] key.
The machine automatically dials
OK
the forwarding number
programmed in the key operator
programs and begins forwarding the fax or faxes.
• To cancel a forwarding operation
Note
Press the [FAX STATUS] key, and then
cancel forwarding in the same way as a
regular fax transmission. (See
"CANCELLING A FAX TRANSMISSION"
on page 26.) The fax(es) that was going to
be forwarded will return to print standby
status in your machine.
• If forwarding is not possible because the
other machine is busy or a transmission
error occurs, recall attempts will be made
according to the recall times setting. If
forwarding is still not successful after the
set number of recall attempts are made,
the fax(es) will return to print standby
status in your machine.
• When forwarding is performed, all faxes
that have been received in memory to that
point are forwarded. The page that was
being printed when the problem occurred
and all following pages will be forwarded.
• After a fax is forwarded, the fax data is
automatically cleared from memory.
SPECIAL FUNCTION
PRINT
ENTRY
RX DATA TRANSFER
RX DATA TRANSFER
:12345678901234
12345678901234
123456789012
TRANSFER
ADVANCED TRANSMISSION METHODS
3
47