Sharp AR-FX11 Operation Manual page 11

(2)
PAPER COPY
COPY EXPOSURE
SELECT RATIO
SCAN COLOUR MODE
RESOLUTION ADDRESS
FAX PROGRAM
(16) (17) (18) (19) (20) (21)
(14) [MODE SELECT] keys (step 1 on page 18)
These are used these keys to change modes.
(15) [FAX] key/FAX indicator/LINE indicator/DATA
indicator
Press to switch to fax mode. The base screen of
fax mode will appear in the display.
The LINE indicator lights up during transmission
or reception of a fax. When a fax has been
received, the DATA indicator blinks. (When there
is fax transmission data in memory, the DATA
indicator lights up.)
(16) [PROGRAM] key (page 45)
Press this key to use a program.
(17) [RESOLUTION] key (page 15)
This key is used to select resolution and
exposure settings.
(18) [ADDRESS] key (page 21)
This key is used to search for a fax destination
that has been stored as an auto-dial number in
the address book.
(19) [BROADCAST] key (page 32)
This is used to perform a broadcast transmission.
(20) [ORIGINAL SIZE] key (page 14)
This is used to set the size of the original to be
faxed.
(3) (4)
FAX STATUS
BACK OK
AUTO 2-SIDED
OUTPUT
IMAGE COPY
SPECIAL FUNCTION
FORMAT
ORIGINAL SIZE DUPLEX SCAN
BROADCAST
(22) (23)
BEFORE USING THE FAX FUNCTION
(5) (6)
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
@.- _
ACC. #-C READ-END
(24)
(21) [DUPLEX SCAN] key (page 22)
Press this key to use the duplex scan function.
(Only on models with a RSPF installed.)
(22) [SPECIAL FUNCTION] key
This key is used to select a special transmission
or reception function, configure function settings,
and to store auto-dial numbers.
(23) Arrow keys (
These are used to select items and move through
pages.
(24) [START] key (
This is used at the following times:
(1) When starting transmission
(2) When scanning an original
(3) When starting manual reception
(4) When configuring and storing settings
• When the auto power shut-off function is
Note
activated, All lights except the mode key
lights go off. For the information on the
auto power shut-off function, see the
"Operation manual (for general
information and copier)."
• For information on the keys and lights
which are used for the copy function and
other functions, see "Operation Panel" in
the manual for each function.
(7) (8)
)
)
1
9