Polling Transmission (Memory Polling) - Sharp AL-2060 Operation Manual

POLLING TRANSMISSION (MEMORY POLLING)

This function is used to transmit an original that has been scanned into memory to a fax machine that polls your fax
machine. If desired, polling fax machines can be restricted to machines whose fax numbers have been programmed
in your machine ("RESTRICTING POLLING MACHINES (POLLING SECURITY)" on page 75).
To let other fax machines poll your fax machine, the original to be transmitted must be scanned into memory and the
reception mode of your machine must be set to "Auto".
You can select whether polling transmission will take place once or repeatedly. If once is selected, the original that
was scanned into memory will be automatically deleted after polling transmission takes place. If repeated polling
transmission is selected, the original will remain in memory until it is deleted.
More than one original can be scanned into polling memory (all originals will transmitted when your machine is
polled).
Only one memory polling operation can be set up, and the polling machine must be capable of polling reception.
The original(s) in polling memory will be transmitted when a fax machine calls your fax machine and requests polling
transmission. Automatic fax reception is possible while your machine is on polling transmission standby.
Your fax
machine
Select memory polling
Setting up polling transmission:
Place the original in the RSPF or on the document glass and perform the following steps:
1
Press the [MENU] key.
1,2,3,
1,2,3,
SP. FUNC
2
Press the [ ] key (
until "7:MEMORY POLL MODE"
appears, and then press the [OK] key.
Selection
"7:MEMORY POLL MODE"
beep
The original is read
into memory
Polling fax
machine
) or [ ] key ( )
Polling is
approved
polling
Select polling
3
Press the [ ] key (
to select the number of times polling
transmission will take place and press
the [OK] key.
1,2,3,
1,2,3,
SP. FUNC
4
Press the [START] key (
SPECIAL FUNCTIONS
Original is sent
from memory
beep
Original is received
) or [ ] key ( )
"1:1 TIME" or
"2:REPEAT" can be
selected as the number
of polling operations
allowed.
).
73
5