Hold Function - Sharp MD-SR75H Operation Manual

Hold Function

Orange
mark
Hold Release
Orange
mark
Hold
Release
The present operation condition can be kept even
if other buttons are accidentally pressed in a place
such as a crowded train.
Move the HOLD switch to the safety posi-
tion (direction indicated by the arrow).
(An orange mark appears.)
To cancel the hold mode, move the HOLD switch
away from the safety position (the opposite di-
rection of the arrow).
If the hold function is active whilst the power is
turned off, the power cannot be turned on by
mistake and the battery will not be drained.
A HOLD switch is on both the remote control and
the main unit.
Various controls are possible depending on the com-
bination of the two switches.
Note:
Cancel the hold mode to operate the Portable
MiniDisc Recorder. Otherwise, it will not work.
Web-site: www.sharp.co.uk/support
DEUTSCH
FRANÇAIS
ESPAÑOL
SVENSKA
ITALIANO
NEDERLANDS
ENGLISH
Help Line: 0990 274277 (office hours)
9