Renkus-Heinz Iconyx IC8-R User Manual page 71

SERVICING and TROUBLE SHOOTING (Continued)
4.
to be replaced.
5. Try Restarting the unit by pressing the Restart button. Double click on the the array's icon and press the Restart button when
the properties window opens.
1. This indicates that this RHAON device is acting as the CobraNet Conductor and it is passing signal. Every CobraNet network has a
condition.
Symptom: Some of my RHAON features are not working even though they worked previously. For example, when I try to change
Presets the new Preset won't load and I can change my EQ settings but can't save them to the loudspeaker(s).
1. This indicates your CobraNet components are not functioning properly and communications between your computer and the
An alternate method of correcting the problem is to Restart the computer. To prevent this from reoccurring set your laptop's
Note that this CobraNet malfunction does not affect normal operation and your system will continue to operate normally until
you try to change some of the settings.
SWITCH RELATED ISSUES
Symptom: I placed my RHAON devices on the same network as other devices (venue PCs, lighting, etc.) and now neither RHAON
nor the other devices are acting abnormally.
1. We recommend that your RHAON network be placed on a network separate to that of anything else. If it is absolutely
necessary to have them running through the same switch, it is recommended to use a managed switch and set up separate
devices in another.
Symptom: I have set up my VLANs but now I cannot connect to / scan for the RHAON loudspeakers on my network.
1. Verify that the physical ports both your RHAON loudspeakers and your computer are connected to are all on the same
VLAN.
2.
IC-R
Users Manual
71