Renkus-Heinz Iconyx IC8-R User Manual page 39

IC-R
Users Manual
Copy Settings / Copy Presets
Right clicking on one of the Array Icons while in either the Connect or
-
introduces the window shown below, which allows you to select what
in the virtual mode. It also functions only between like units. You cannot, for example, copy Presets or beam steering information from an
IC8-R to an IC32-R or from an IC8-R to an ICLive ICL-R. If you try, a warning prompt will alert you to the oversight.
Reset
and easily. Reset can be initiated from either the controls on the rear of the array or from the associated computer.
On the array's rear control panel simultaneously pressing the Volume Up and Pad push buttons for several seconds initiates Reset even
when the panel controls have been locked. It provides a means of gaining control of the array when a RHAON equipped computer isn't
available
Connect or Control Properties window also enables the Reset feature. A prompt will ask if you want to restore the array's default settings.
Answering Yes will initiate the change and restore all the default setting. It's a good way to return to "ground zero" if the array starts behav-
ing strangely.
39