Renkus-Heinz Iconyx IC8-R User Manual page 19

Loudspeakers model number or name
AC power to the Array On and Off is a
separate operation.
the onset of input clipping. Analog inputs
clip at +12 dBu without the 10 dB input
pad, +24 dBu with the pad.
slider with mouse or by using up/down
settings below -8 dB prevent the loud-
speaker from reaching full output.
glows green when signal is inverted. Use
with caution.
bar graph.
made as a reminder of the need to save
Status Indicators: The Thermal, Peak and Fail indicators above the output meter provide critical information on the array's status. The
the loudspeaker is being used close to its rated output. Flashing frequently is a sign that the system volume needs to be turned down. The
Power On/Standby Button:
when associated with an actual array.
changes.
Users Manual
loudspeaker and listing its location.
Press Wink with Light button to turn the
loudspeaker's wink light on and off to aid in
identifying the loudspeaker and its location.
Press Wink with Audio to send a Tone
signal or Pink Noise to the loudspeaker.
Output bar graph. "0" represents the
positive values indicate how far the signal
values indicate the amount of headroom
left before the onset of limiting.
Mute button mutes the entire loudspeaker.
the event of a malfunction.
IC-R
19